Bay Area Circuits will built a 2 sided board for $30 (educational discount) up to 50 sq. in. I’m planning to do a single board with all my PCBs on it: 2 Hand Contollers (1.25″ x 4.75″) 2 Sensor Boxes (1″ x 2″) 1 Mega shield (2″ x 4″) 1 RJ-45 dual jack (main box […]
hand controller
Sensor Box v1
There will be a box at each player’s station. One RJ-45 connects to the Mega with power and TX/RX. The other RJ-45 connects to the hand controller with the same power and TX/RX. It also uses the other data pair to connect a photo transistor that will have a beam from a laser pointer for the […]
Hand Controller v3
Changes: Uses PoE going into the Trinket’s BAT line. This can regulate from between 5.5v and 16v, so I have the option of PoE up to 16v. Other chips on the board are powered from the Trinket’s 5V regulated output. Now using one 75176 for Tx and Rx rather than two. This allows me to […]
Hand Controller v3 PCB ready for fab
I have the board for the Hand Controller designed. Need to add the Light Sensor Box and a shield for the Mega. Passes tests for manufacturing at Bay Area Circuits where I can get a 50sq.in. made for $30. I want to panel a single board to get at least 2 hand controllers, 2 light […]